-
February 2024 by Eylene Dano
Brought in my car with an enormous rust problem underneath- Eric did an excellent job repairing my car. Highly recommend this auto shop.
-
November 2023 by Joseph DelPapa
Thank you for a great job on the 06 GMC envoy. They fixed it sooner than expected. Great service and experience. I would definitely return for any welding needs. Thanks again Joe and Eric
-
November 2023 by Bernard St.onge
Great service, easy to work with. I like their work ethics.
-
September 2023 by David Barr
I went into men’s welding with my landscaping trailer, I needed to drop down tailgate repaired. Without hesitation, Joe’s son drop what he was doing did a spot weld on my drop down tailgate it was very kind, polite, respectful, and extremely helpful. I would recommend man’s welding to anybody. They have been Helpful along my journey more than once.Thanks Joe and thanks to your son
-
May 2023 by Caleb Lomme
I brought my 2014 Ford Taurus to the property. I was a bit hesitant due to me seeing my own body guy for 5+ years. But I was highly recommend to atleast try out Manns Auto. And I have to say, I’m extremely happy and satisfied with the work that was done to my vehicle. They did custom work that fixed a big issue for myself, and Joe Mann also noticed that I needed an oil change. Which he promptly did as well. 10/10 will go again for any further issues.Services: General repairs & modifications
-
May 2023 by Bob
I was referred by a friend for my 1998 Firebird subframe connectors,what a great job and well thought out beyond my need Thank You!!
-
May 2023 by Jay Lewis
I had a piece of my tractor break off, a piece that holds a lot of force and the choice was to buy a new part or have it welded. Eric at Mann Auto Welding did the job and I couldn't be happier with it. The welding looks good and it's stronger than new now. Eric was very friendly and understood exactly what I needed. I will go back every time I need welding done. I highly recommend Mann Auto Welding.Service: Welding
-
May 2023 by Jenna Nephew
I had a great experience here. I failed inspection for a rust hole and they were going to charge me 900. I had a friend refer me to Manns they took me right in and only charged 200. They were fast efficient and very honest.Service: Welding
-
February 2023 by Laurence Prestia
After reading all of the reviews it is clear that my experience is not dissimilar to others.I inherited a 2002 Toyota Tundra SR5 V6 (for all you Toyota Truck 'junkies' this was a first issue Tundra with the famed 3400 engine and a rare 5 speed manual transmission). The truck had only 167k miles. Just broken in considering the well documented life span of this powertrain. Cab, doors and front of truck had zero rust. However, the rear wheel wells had significant rot as did the frame. In addition to multiple 'holes' in the frame there was rust and signs of further deterioration throughout. The individual I inherited the vehicle from had taken it to a Toyota dealership for consultation. They deemed the vehicle 'unsafe' and 'scrap'.Once I took ownership, I took it to three independent body shops for opinion and to explore options. The feedback was all the same - no one wanted to touch it. One shop did recommend I contact Toyota concerning the frame recall. I did and after multiple conversations with various levels of service hierarchy it was not an option to have Toyota replace the frame under the recall program. Further, I learned they do not manufacture the frame anymore. Buying a new frame and having a shop make the swap was not an option. I then performed an extensive internet search looking for a used frame. Found one in New Mexico but could not confirm all the details. It was during this internet search that I 'stumbled' upon Mann Auto Welding. After reading all the reviews, perusing the pictures of their work and seeing they were only 20 minutes from my house I sent an email to the address on the website and received a response from Eric within 12 hours. We arranged for me to bring the truck to his shop that week for consultation. My first impression of Eric was that he was honest, sincere and an experienced craftsman. He got under the truck and did a thorough search of the frame, bed and wheel wells. We chatted about the work that was needed and Eric carefully explained how he would approach the job. There was a high degree of confidence he had a solution that would not only allow the vehicle to pass inspection but restore to 'as good as new'.He worked up an estimate and sent it to me within two days. I accepted, placed a deposit and we scheduled the work to start in 6 weeks. Eric contacted me ~10 days later with an opening the following week due to a cancellation. Truck went at the end of December. I picked it up ~2 weeks later. In that time Eric had removed the bed, stripped the frame of surface rust, cut out all rotted portions of the frame, custom fabricated new/stronger portions and welded them to the cut out portions, fabricated new mounts, custom fabricated and welded new wheel wells, welded and fixed holes in the bed, replaced rear shock mounts and shocks, and lastly, he painted the entire frame and underside with three coats of sealer and rust prevention. During the process Eric documented the work - and some new findings - with pictures that he emailed to me. This simple step made me feel that the service and work were transparent. Admittedly, I did not expect this but was extremely appreciative of that level of communication.I was not surprised at the result when I picked up the truck. However, that did not overshadow my appreciation and respect for the quality of craftsmanship that went into the result. It exceeded all expectations of what was possible. I am convinced the frame is stronger and will last longer than if it were new. Eric's experience, creativity, honesty and transparency is not only evident in the result but also in the overall level of service. To be able to combine exceptional craftsmanship with exceptional service is rare, in my opinion. Thank you Eric. You have more than earned my respect and recommendation.Services: General repairs & modifications
-
February 2023 by B Fu (符中光)
Super nice people here. Broke my 1969 skibob handle bar in a crash. Drop in to see if they can repair it for me. They drop what they were doing and repaired it for me in 15 minutes. And the price they charged me was awesome. Very affordable. Highly recommended. Their shop is behind the house in a steel building.Service: Welding
-
January 2023 by Stan Strzepek
I brought my 2005 Chevy Silverado to Mann's for an evaluation of my truck's frame. Eric did a thorough evaluation of my truck's frame and explained what my options were regarding repair. I had the work done and I was very pleased with the results and the pricing. I found Mann's Auto Welding (Joe and Eric) to be very knowledgeable and honest business. I highly recommend them.Services: General repairs & modifications
-
December 2022 by Peter Silver
Repaired my 2005 Jeep Rubicon frame body mounts great job great price great Crew thank you.Service: General repairs & modifications
-
November 2022 by David Batt
“Wow”, “Amazing work”, “looks better than new”, and these were what the inspection techs said that originally failed my 2007 Tacoma for frame corrosion. I wish I had found Eric and his business months ago, but instead I visited or called a dozen other shops. Some only do accident repair, not corrosion, some said it was too far gone and 1 shop said it would be months before they could fix it and there was no assurance it would pass inspection. When my son suggested Mann’s, I drove my truck over and had it assessed. Eric assured me he could fix it, gave me a very reasonable quote, and said it would take about 10 days once in his shop, unfortunately he was scheduling out 6-8 weeks. I booked the appointment for early January but asked him to call me if he had any cancellations. Fortunately he had one and my truck went in on Nov 9 and I picked it up on the 22. He found more corrosion than during the original inspection so he had to charge a little more than the original quote, but I completely understood and was happy with the revised cost. Really a quality job and VERY reasonable price. If you are like me and have a Tacoma that does not fall under Toyota’s recall program, then Mann’s is who you want to visit to get your Tacoma, back into prime condition!Services: Welding
-
November 2022 by Gage McElroy
Outstanding service. These guys saved my 2006 Tacoma that had major rust damage and a hole in the frame about 10 inches long. After a week and a half these guys made this truck even better than when it came out the factory. Amazing customer service, amazing welding and actual frame repair, and affordable. I’ll be sending everyone I know their way.Services: Body & Trim
-
November 2022 by john sousa
these guys saved my truck when no one else could. my truck was so rotted it was not road worthy. if they did not do the work my vehicle would have been scrapped. Because no one else could have done the magic these men did. I highly recommend any one with auto body problems to go see them.Services: Body & Trim
