-
October 2024 by Lester Peebles
Bad all bad been back 6 time all ba
-
October 2024 by King David 314
Bought some cylinder heads from them. Great product, looked band new!
-
June 2024 by Harold Noland
Took my 97 ranger to suttran automotive in desoto for engine rebuild. Schreve put in wrong camshaft. Sent motor back, they installed wrong rear main- plus pan gasket leaked. Suttran is out of business & now I'm out $8000 for bad motor & transmission that won't shift right. Schreve & Suttran are biggest crooks in Jefferson county. See them in court.
-
April 2024 by M C
Got my motorcycle Engine resurfaced and had a great experience. Great service on the phone and in person. Job was done excellently, they went behind expansions and I was surprised by the price.
Highly recommended.
-
September 2023 by Javoney Fleming
Well I must say, I'm very satisfied with Shrievs verses my past experience with them! The cost has gone up tremendously but the overall results for me was a nicely rebuild in my engine! Sure it was a lengthy process but I'm very happy with the results! Thank you ! Just be sure to get a full understanding of what you want from them and make a deal !
-
August 2023 by Jeff Hawkins
I went there almost a year ago(had a engine replaced)and I'm still dealing with them fixing my vehicle right.
-
April 2023 by Chris States
Very unsatisfied with customer service after the third motor being replaced by Shreve. I still have a major oil leak.
-
March 2023 by Alden B.
I was excited to try these people out after finding their website and reading that they have helped 70000 people successfully. But they say they cannot even do a Miata engine, which is quite common. There was nothing on the website to suggest this might be the case. Very disappointing.
-
February 2023 by MD sabbir Hosain
Sir I called you if there is any other means of contacting you please let me know
-
November 2022 by Shawn Ward
Everyone is extra friendly
-
August 2022 by Jeff M.
Told me 1 month to replace motor, took 3 months. Even longer now from reading reviews. BUT my motor had a 2 yr 24000 mi warranty. It lasted 3 yrs but only had 22196 miles on the "new" $5000.00 motor. They used my old original plug wires (they had over 138000 miles on them) and installed champion spark plugs in the new motor. (Cheap garbage plugs). Bolts were loose on the exhaust manifolds. And developed a small oil leak about a month after picking up but did not want to send back for another 3-5 months to have them look at it again.
-
March 2022 by Dan Danielsson
Purchased an engine block from Shreves, they were very helpful, did all the machine work it needed and kept me well informed every step of the way; and shipped it to me quickly when they were finished, friendly staff, block was safely packed for shipping and looks great!
-
October 2021 by Bill D.
I've read & read up on Shreeve's engine rebuilding for over 20 yrs when they opened their 1st in hazelwood n=in north county, I worked as an auto mechanic at west county tech went to ranked to complete my course when it comes to engines , there's no telling what you get into once you are into the engine itself taking off the valve covers to see the springs and the rods are worn, no telling what it is until you see it for yourself, someone mentioned they didn't dip my engine for 4 grand you're lucky to get what you git done the work you mentioned prices was like 30 yrs ago, drawing prices back to 1991 but it's 2021
-
September 2021 by David S.
Absolutely the most TRASH customer service I have ever seen before in my life. They listed a LY6 6.0 GM block for sale that was bored .020" over. Said it was hot tanked, cleaned, painted and brush honed. Pictures on their listing looked like a freshly machined and cleaned block. After trying to pay them for a week they finally took my money. I finally found .020' over pistons since they are rare for these blocks. The block showed up 3 weeks later and was absolute garbage. It was absolutely not hot tanked, cleaned and inspected. There is old dirty oil leaking out of the mains, old gasket material hanging off everywhere, and to top it all off it was still a standard bore block! It literally looks like they pulled a motor out of a junk yard, tore it down and lazily pressure washed it, rattle canned it black and sent it off on a dilapidated pallet missing legs. Rusted, corroded cylinder bores, I mean seriously it is horrible. Absolutely nowhere near what the listing stated. The whole thing is just a marketing scam on their ebay page. I should've known better when they wouldn't even let me pay using paypal or ebay. I called and they said if I sent it back they would refund the money. So now that I waited a month for this motor to build, I now have to pay $300 to ship it back to them and wait for them to maybe refund my money (but not the 1/3 of the price it costs to ship it back)! How in God's name is that customer service?!?! I had to call my bank and file a dispute and got the money for the block back but am now told if I still don't pay to ship it back to them that the money will be taken back out of my account. So all in all I will be out $300 for absolutely NOTHING! This company is trash, if they offered me free engines for life I would refuse and pay someone with good customer service double. And throughout the entire process I was nothing but patient and nice while being ignored and given the run around. So I call back to tell them that it is still sitting here and they need to set up shipping to come pick it up. Even offered to pay half of the shipping at their rate since they get discounted rates and it's only $175 for them to ship it and they refused. I asked to speak to the owner and am told no. And to top it all off when I asked how it makes sense to send someone something they didn't even order (wrong product not at all what is described) she tells me that she sent me something better because it's a standard bore! I don't care how you feel about it being better or not, it is absolutely not what was in the product description. I had asked when ordering how much they would charge to bore it to .030" over and it was too much and I didn't really trust them to do it right. So after telling her that I had ordered the 020" over pistons and was going to use them since that's what the bore of the block was supposed to be she said I wouldn't have been able to use them anyways because the block would've still needed to be bored. Why in the world would you need to bore a block that is 4.020" even more to use pistons that are 4.020". you would need to finish hone it to the manufacturer specs of the pistons which some are made to go directly in a 4.020" bore (like the ones i ordered. Product description said it was honed already, but was told that it was in no way ready to be assembled coming from her machine shop. How is that even possible?!!? Literally all i want is to have them come pick it up and take it back and give me my money back but basically they sent me whatever they wanted and I should be happy with it because to them "I sent you something better". NO, YOU SENT ME TRASH! I could've gotten something this crappy out of a local junk yard for $2-300! this cost $899 plus $175 shipping. Stay as far away from this place as possible if you are looking for any type of quality anything. regardless of what they come on here and respond with, they send nothing near what they advertised and will not make it right by si
-
July 2021 by rick tune
I had my engine replaced and WILL NEVER TAKE MY CAR ANYWHERE but Shreves!!! I am recommending Shreves to everyone. Colin was very Professional and extremely knowledgeable, he was available any time I had a question. My car runs better than when it was new!!! It was well worth the wait. SHREVES ROCKS!!!
